Skip to content 
Methods for mounting a fish finder on a PVC boat. Trophy fishing on the Putorana Plateau these days often involves the use of gadgets and additional equipment. These significantly help anglers increase their trophy hauls by catching larger predatory or peaceful fish, whether pike, grayling, or tench. or crucian carp, it doesn't matter.
Fish finders are constantly being added to bite alarms, underwater video cameras, and other high-tech gear, making them convenient for fishing. But not every angler knows how to attach the equipment to an inflatable boat made of rubber or PVC.
What should you pay attention to when installing a fish finder?
Most fishermen prefer boats made of polyvinyl chloride (PVC). We suggest considering mounting locations for fish finders specifically on these structures. To ensure clear and accurate readings, the device must comply with the following requirements:
· There should be no air bubbles near the echo sounder sensor, which appear when the watercraft engine is running.
· It is better to avoid extraneous vibrations that may come from the transducer.
Having observed the described criteria, you can proceed to the installation of auxiliary equipment.
Mounting points for the fish finder in a boat
Fishermen mainly note three places of fastening, namely:
On the bottom of a boat. This option is one of the most widely used when installing a fish finder. To secure the equipment, use the suction cups included with the device. Alternatively, use the old-fashioned method of gluing it with superglue.
· On transoms. This method is considered the most convenient and particularly popular. The design allows for secure mounting of the fish finder in a PVC boat, with the ability to adjust the unit.
· Away from the boat. This is called the remote method. When no equipment is available, experienced fishermen attach the device to the boat by lowering a regular plastic bottle into the water. The depth can be adjusted by filling it with water or by removing it from the inside.
Where to mount the screen?
The answer to this question will also have several options:
· On a bench, inside the watercraft;
· At the bottom;
· On the side surfaces.
It's also worth noting that each angler must mount the fish finder themselves. Therefore, there are several options.
A popular option for mounting equipment
Factory-installed, i.e., using a transom mounting system. Special components included with the fish finder (bracket, clamp, transducer mount) allow for quick, convenient, and secure mounting. The clamp must be attached to the transom to ensure the system doesn't interfere with certain boat maneuvers while underway.
It's best to place all the components along the side of the boat. Attach the bracket to the bolt, pressing it firmly against the clamp. Then securely attach the device's sensor to it and lower it into the water to its depth. Adjust the equipment's operation and move on to the screen. The best locations for installing it have been described above.
Conclusion
We've discussed the best places and methods for mounting a fish finder in a PVC boat. This is just one of the most popular methods, using factory-made components included with the devices. Experienced fishermen like to make everything themselves from scrap materials.
It's worth noting that homemade options for attaching auxiliary fishing equipment aren't as bad or hopeless. They're less expensive and can make fishing more rewarding.
We'll cover how to make homemade fish finder mounts for PVC boats in another post. We wish anglers excellent, substantial catches on their trophy trips and clear skies above.
