Skip to content 
How to make a fish finder mount for a PVC boat yourself? Anglers who participate in trophy fishing trips on the Putorana Plateau often share their secrets about various homemade crafts. These allow them to land substantial trophy predatory fish (zander, pike, burbot, etc.). Fish finders often play a key role.
We've previously discussed how to attach them to PVC boats. This article focuses on homemade fasteners that are easy to make using readily available materials. Simple, straightforward designs help you save money. They're often as good and functional as expensive factory-made products.
What do you need to make a homemade echo sounder mount?
The simplest method for making a fish finder mount is considered to be the following. To make it, you'll need:
· PVC pipe for regular water supply, about a meter long;
· A metal pipe, which is slightly larger in diameter than the previous one;
A clamp and two large cable ties for securing it, as well as several smaller diameter clamps for securing the sensor wires. All of these components can be purchased at your local hardware store.
Step-by-step instructions for making a homemade design:
1. Cut the plastic pipe to the required length, based on the characteristics of the boat.
2. Bend the top slightly into an arc. This design is easy to transport to the fishing spot and serves as a stand for the fish finder.
3. The bottom of the PVC pipe must be flattened.
4. Drill holes for the mounting bolts that connect the structure to the transom.
5. Screw the transom to the pipe with bolts.
6. Twist the wires together with small cable ties and secure the sensor to the pipe so it won't be damaged by contact with algae, the bottom, or underwater objects.
7. We clamp the clamp to the starboard and port sides of the boat. This allows the structure to be easily installed in the desired location and removed without any problems.
It's worth noting that the connecting assembly can be carried out directly on the shore of the pond. It's also possible to assemble the entire structure of the house before fishing.
Features and important nuances
Let's take a look at some important nuances and features of attaching a fish finder to a DIY PVC boat.
When moving through the water at high speed, the sensor should clearly show where schools of fish are, holes, and objects on the bottom.
· When performing maneuvers and turns, the device must be in contact with the bottom of the river or lake, regardless of the speed the boat is gaining.
· The design must not cause the watercraft to list in different directions.
· The echo sounder must be installed so that it does not create splashes or spray when moving.
Conclusion
We've described the simplest way to make a fish finder mount for a PVC boat. We've also outlined the key criteria needed to catch a big fish. Experienced fishermen use rotating models. We'll explain how to make, use, and attach them to your boat soon.
Echo sounders used on rafting trips on the Putorana River allow you to significantly diversify your catch. They help you catch large predators: taimen, brown trout, char, whitefish, and many others.
